Part Number
Part Number:
NSN:
NIIN:
Item Name:
SYNCHRO , CONTROL TRANSFORMER
Definition:
A SYNCHRO CONSISTING OF A STATOR AND ROTOR INDUCTIVELY COUPLED. THE ELECTRICAL OUTPUT OF THE ROTOR IS DEPENDENT UPON BOTH THE POSITION OF THE ROTOR AND THE ELECTRICAL INPUT TO THE STATOR FROM A TRANSMITTER SYNCHRO OR A DIFFERENTIAL SYNCHRO. DOES NOT INCLUDE VARIABLE RESISTORS, GONIOMETERS, OR VARIABLE TRANSFORMERS.
CAGE Information
| Code | Company |
|---|---|
| 36090 | LOCKHEED MARTIN LIBRASCOPE CORP |
Federal Supply Class
Title
SYNCHROS AND RESOLVERS
Inclusions:
Exclusions:
EXCLUDES SYNCHRO SYSTEMS; SERVO MECHANISMS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAVL | PILOT DIAMETER | 0.8750 INCHES NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 24.0 MILLIAMPERES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJSL | BODY SIZE | 15 |
| ABXF | SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| ABKK | FLANGE DIAMETER | 1.4370 INCHES NOMINAL |
| AAVH | SHOULDER DIAMETER | 1.3120 INCHES NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 26.00 MINIMUM AND 33.00 MAXIMUM |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 77.80 MINIMUM AND 84.50 MAXIMUM |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 40.00 OUTPUT |
| AAQL | BODY STYLE | STANDARD ROUND B |
| ABHP | OVERALL LENGTH | 2.5020 INCHES NOMINAL |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 60.0 MILLIWATTS MAXIMUM |
| AJSY | ZSO RESISTANCE IN OHMS | 7800.00 MINIMUM AND 9512.00 MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1850 INCHES NOMINAL SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.05 INCH-OUNCES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7720 INCHES MAXIMUM |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A |
| AAFZ | BODY MATERIAL | STEEL, STAINLESS |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.500 INPUT TO OUTPUT MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| AHCG | MAXIMUM TEMP RISE | 60.0 DEG CELSIUS |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 TAB W/SCREW |
| CSJY | TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0/+6.0 |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 1050.00 MINIMUM AND 1300.00 MAXIMUM |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |